calliper Brake

We do of course also offer the PIT brake for those who do not currently have any PITLOCK securing devices on their bicycle. 10 This set consists of a set of safety bolts, security pass and a PIT Key.

_____________________________________________________________________

PIT brake is offered for the (re-) purchasing of a set of securing devices. If you already have PITLOCK on your bicycle, you can use your PITLOCK code number (on the security pass) to order appropriate securing devices for the brake.

NOTE!!! PIT brake generally fits on the screw base of the normal retainer.
Magura suspension forks with the name "Magura Firmtech" cannot be secured with PITLOCK!!!

_____________________________________________________________________

For safety reasons these securing devices for brakes are NOT suitable for securing the brake callipers of DISK BRAKES!!!



PIT brake consists of 2 M6 code bolts with the corresponding locking elements.
It is sufficient if one side is secured at the front and the same side at the rear. The brake is then sufficiently secured against theft because the two remaining parts do not form a complete brake together. Of course both brake levers can be secured at the front and rear. Drip a little locking fluid on to the threads of the code bolts and then screw them in. These are then also protected against vibrations and attempts to open them.

The second washer supplied can be mounted for the purposes of adaptation if the height of the one washer is not sufficient.